Basic Occupational Safety and Health (BOSH) Safety Officer 2 Practice Exam

These questions are part of the practice quiz. Start practicing

• Which of the following best describes simple ergonomic controls that can reduce musculoskeletal disorders?
• What are common methods for performing workplace inspections and how should findings be addressed?
• Which step is NOT part of a basic root cause analysis approach?
• Which item is not typically included in an equipment inspection checklist?
• Which three core elements should be included in a Safety Management System (SMS) for a BOSH Safety Officer 2 program?
• Which type of monitoring uses indicators of internal dose and of effect to assess exposure and health impact?
• Which item is NOT part of the core components of a Safety Management System (SMS)?
• How can a Safety Officer ensure contractor safety management?
• Which of the following is a common ergonomic risk control for musculoskeletal disorders?
• Safe work procedures and training are examples of which level of the Hierarchy of Controls?
• Which PPE is recommended for eye protection during grinding?
• The opposition to the flow of electrons along a conductor is known as what?
• Which elements constitute an effective hazard communication program for workplace chemicals?
• Which statement best describes the role of SDS and GHS labeling in chemical safety?
• How should you approach noise exposure in the workplace and what protection is most effective?
• Under which rule is periodic examination conducted?
• Which statement best describes the role of centralizing incident data in safety decision-making?
• What is machine guarding, and why is it essential in safeguarding workers?
• Describe the steps involved in a Permit-to-Work system and when should it be used?
• Describe the steps involved in a basic incident investigation.
• How should incident data be stored and analyzed to support safety decisions?
• How should a Safety Officer 2 measure the effectiveness of corrective actions after an incident?
• What best describes the purpose of biological monitoring in occupational safety?
• The act entitled 'An Act Strengthening Compliance with Occupational Safety and Health Standards and Providing Penalties for Violations thereof' is known as which statute?
• What elements should be included in an Emergency Drills program and how often should drills be conducted?
• Medical surveillance is defined as what?
• In risk assessment, which factors are combined?
• What is the primary purpose of medical surveillance in occupational health?
• The interviewer should reassure them that this is a fact-finding progress only.
• Which term is defined as a potential source of harm or an adverse health effect on the person involved?
• When should a Job Hazard Analysis (JHA) be performed to be effective?
• In a Confined Space Entry Program, the Rescue Plan should ensure what?
• Which practices help ensure contractor workers are as safe as employees?
• What is the primary purpose of training records and how should they be maintained?
• What does a Hazard Communication standard require in terms of training and information for workers?
• Leading indicators are proactive safety measures, while lagging indicators reflect safety outcomes. Which of the following is a lagging indicator?
• Who administers the Employees' Compensation Program?
• Which of the following correctly lists an Elimination and a Substitution level example in the Hierarchy of Controls?
• What is the role of incident trend analysis in Safety Officer duties?
• Which monitoring approach measures environmental agents in the workplace to assess exposure risk?
• Which electrical safety hazard requires measures such as training, proper wiring, grounding, maintenance, PPE, and lockout/tagout?
• What is the role of Safety Data Sheets in hazard communication?
• Which statement about the annual exposure data report form code is correct?
• Which of the following is an administrative control?
• What role does training play in Safety Officer 2 responsibilities and what makes it effective?
• Which of the following best describes a tetrahedron?
• Which PPE is most appropriate for protecting against airborne contaminants?
• Which of the following is a true Elimination example?
• During an accident investigation, the investigator should put the person at ease.
• Which is a direct benefit of good housekeeping in the workplace?
• Which statement best describes the role of workers in safety programs?
• Which elements are essential to an Emergency Response Plan (ERP)?
• Which statement describes the purpose of a Job Safety Analysis (JSA)?
• Interviewees should be told that the investigation is simply a fact-finding exercise.
• To comply with good chemical hygiene, how should chemical labeling and storage be organized?
• Which activities commonly require a Permit-to-Work?
• Explain the Plan-Do-Check-Act (PDCA) cycle and its role in BOSH safety management.
• The combination of Safety Data Sheets (SDS) and GHS labeling primarily helps with
• How should chemical spills be prepared for and contained?
• Which set of steps best describes the typical hazard identification and risk assessment (HIRA) process?
• The severity rate is based on the total of all scheduled charges for all deaths, permanent total and permanent partial disabilities, plus the total actual days of the disabilities of all temporary total disabilities which occur during the period.
• Which statement best describes the purpose of a hazard communication signage program?
• Hierarchy of control measures order?
• Under Section 5, the worker has the right of refusal to work without threat or reprisal from the employer if, as determined by DOLE, an imminent danger exists.
• According to the material, if any one of the four essential elements for fire is removed, the fire will be extinguished.
• What is the term for an active fire protection device used to extinguish or control small fires?
• The interviewee should be reminded that the facts will be used to prevent recurrence.
• Which of the following is an example of an important person in the company who has the role of keeping the workplace safe?
• According to the material, which combination of elements is listed as essential for fire?
• The fact-finding process should help improve safety by identifying conditions that allowed the incident.
• What are the key elements of an emergency communication plan?
• What is the term for an organization's occupational health and safety policy that serves as a guide for action and requires senior management commitment?
• What is a Job Hazard Analysis (JHA) and what are its main steps?
• A health and safety program is a definite plan of action designed to prevent accidents and occupational diseases, and must include the elements required by the health and safety legislation as a minimum.
• Which statement best describes typical legal requirements for incident reporting and investigations in a workplace safety program?
• The point of operation is the point where work is performed on the material, such as cutting or shaping.
• Emergency preparedness is defined as what?
• The sole guiding purpose of this investigation should be to prevent or control recurrence.
• An unsafe act is...
• Which leadership practice most directly demonstrates a safety culture by ensuring ongoing resources and support for safety initiatives?
• Describe the general responsibilities for electrical safety in the workplace.
• What is noise exposure assessment and what controls can reduce risk?
• Which term describes a potential source of harm or adverse health effect in the workplace?
• What are key considerations for ergonomic workstation design for office workers?
• Which act is titled 'An Act Strengthening Compliance with Occupational Safety and Health Standards and Providing Penalties for Violations thereof'?
• What is the purpose of permit validity and how is it tracked?
• Which document is the IRR for the Act Strengthening Compliance with Occupational Safety and Health Standards and Providing Penalties for Violations thereof?
• How should electrical equipment be rated and maintained to ensure safety?
• Which statement describes the pre-placement health examination?
• What is Lockout/Tagout (LOTO) and why is it essential for machinery safety?
• The statement 'Accidents are investigated to blame and not to have recurrence of the same' is True or False?
• Which statement accurately describes the difference between a safe work permit and routine task authorization?
• Why is terminology distinguishing an incident from an accident important in safety reporting?
• How should an organization address psychosocial hazards in the workplace?
• Which item is NOT typically part of effective incident data collection and reporting?
• Under safety policy, workers cannot be required to return to work when there is continuing imminent danger to life or health.
• Which of the following is a key element of a Confined Space Entry Program?
• When a significant safety nonconformance is identified during an audit, which sequence of steps should be followed?
• What purpose does secondary containment serve in chemical storage?
• These facts will be used to prevent a recurrence of the incidents.
• Which program provides income benefits and medical and other benefits in the event of work-connected sickness, injury or death?
• An accident investigation is only about finding fault and punishment.
• Which term describes recognizing items or materials that may cause injury or harm to people?
• Biological monitoring can be divided into (a) monitoring of exposure, and (b) monitoring of effect, for which indicators of internal dose and of effect are used respectively.
• What is a common root cause analysis approach used in safety investigations?
• How do you evaluate the effectiveness of a safety program using performance metrics?
• Who should be informed or reported to regarding accidents, dangerous occurrences, and hazards according to Section 7 of DO 198-18?
• What term describes the process of analyzing the possibility of harm from hazards and evaluating the potential damage?
• What is the difference between leading and lagging indicators in safety performance?
• What should chemical containers be labeled with?
• What is occupational health surveillance and when should it be implemented?
• In ergonomic design for office workers, which practice best reduces musculoskeletal risk?
• The investigation aims to prevent recurrence and has no other goals.
• Local exhaust ventilation is described as which of the following?
• Which step is essential in developing a safety training program to ensure competency?
• What entry precautions are typically required for a confined space?
• The health and safety program must include the elements required by the health and safety legislation as a minimum.
• Which element is listed as essential for fire in safety concepts?
• Which measures contribute to forklift and vehicle safety in industrial settings?
• What is the difference between hazard assessment and exposure monitoring?
• What is the primary purpose of housekeeping in preventing slips, trips, and falls?
• Under Rule 1967.09, the examination of an employee leaving the company is to determine which of the following?
• People may be reluctant to discuss the incidents, particularly if they think someone will get in trouble.
• What is the purpose of safe work permits for high-risk activities and what should be included?
• What is the purpose of post-incident communication in an emergency plan?
• Biological monitoring involves the measurement and assessment of agents or their metabolites in tissues, secretions, excreta, expired air, or any combination to evaluate exposure against a reference.
• What is the primary purpose of lockout/tagout procedures?
• Which method would verify that a control measure is effective?
• Which report must be submitted annually using the prescribed form DOLE/BWC/HSD-IP-6b?
• Which statement best describes a Safe Operating Procedure (SOP)?
• What is the purpose of a permit-to-work for hot work and what information should it contain?
• Which sequence correctly represents the possible development of disease from exposure to a hazardous chemical?
• What is the role of management review in an SMS, and how often should it occur?
• What describes a basic approach to performing a root cause analysis on a near-miss event?
• Which groups are covered under the Employees' Compensation Commission?
• A Permit-to-Work system is typically required for which type of activity?
• Which approach is most effective in preventing workplace violence and aggression at a job site?
• What is required for safe operation around electrical equipment to prevent shock and arc flash hazards?
• A material that contains many free electrons and is capable of carrying an electric current is called a ______.
• AMR, using form DOLE/BWC/HSD-47, is submitted to the regional Labor Office concerned on or before the last day of March of the year following the covered period.
• What are the basic steps of a Lockout/Tagout (LOTO) procedure?
• How do you differentiate between a hazard and a risk?
• In a confined space entry, what is the purpose of continuous monitoring?
• Which practice best ensures corrective actions are effective after implementation?
• Which set lists the four elements essential for fire according to the material?
• Which option is NOT a stated purpose of the leaving employee examination under Rule 1967.09?
• Which statement best describes the purpose of the Employees' Compensation Program?
• All PPE shall be the appropriate type as tested and approved by the DOLE based on its standards. The usage of PPE in all establishments, projects, sites and all other places where work is being undertaken shall be based on the evaluation and recommendation of the purchasing officer.
• Medical surveillance is the systematic assessment of employees exposed or potentially exposed to occupational hazards.
• Which of the following is an example of PPE?
• Which of the following is not a type of disability recognized for ECC benefits?
• Which fire extinguisher class is for ordinary combustibles?
• Which components are typically included in a Respiratory Protection Program?
• The cost of personal protective equipment (PPE) shall be part of the safety and health program.
• How should an organization respond to a chemical spill or release?
• Which method is NOT a valid method for incident trend analysis?
• In the OSH training framework, which role is associated with prescribing the prescribed OSH training?
• During equipment inspections, which items should be checked to maintain safety?
• Regarding training records, which element is essential to demonstrate ongoing competency?
• Which term is described as the substance that provides the fuel for a fire?
• Which statement best describes the difference between a hazard and a risk?
• A punitive tone is appropriate during accident investigations.
• What is the primary purpose of signage and labeling in hazard communication?
• What is a near-miss and why is it important?
• How do you conduct a basic risk assessment using a simple risk matrix?
• An accident is best described as...
• Which scenario best illustrates when a Permit-to-Work is required?
• Which statement best describes a near-miss?
• An important person in the company who has the role of keeping the workplace safe is the
• How is a typical fire risk assessment conducted and what basic fire safety controls are included?
• What is a practical approach to controlling slips, trips, and falls in the workplace?
• What is the primary purpose of a written Safety Policy in a workplace safety management system?
• What is control measure validation, and how is its effectiveness verified?
• What is the purpose of Permit-to-Work closure verification?
• Which is a purpose of a return-to-work examination after an absence due to illness?
• What is the role of SDS guidance during a chemical spill response?
• Which statement is true about general ventilation in the context of occupational safety?
• What health surveillance practices should be included in a safety program?
• In the sequence of disease development, what is the term for the amount of agent that actually enters the body?
• Which element is NOT typically part of alarm system maintenance?
• The investigation should be conducted as a fact-finding progress rather than as a punitive procedure.
• The facts collected during the investigation are intended to prevent recurrence of similar incidents.
• What is the purpose of a safety inspection or audit and what should be included in a typical checklist?
• Which statement correctly lists the order of the hierarchy of controls from most to least effective?
• Within the hierarchy of controls, where does PPE fall in terms of effectiveness?
• Which statement best distinguishes hazard from risk?
• Which item should a Safe Work Procedure include to handle unexpected events?
• Which of the following is a required step in the lockout/tagout process?
• The findings of an accident investigation are used solely for internal records.
• Which two factors are typically assessed in a simple risk matrix?
• What is the primary purpose of a Safety Management System (SMS) in an organization?
• Which of the following is a required element of lockout/tagout programs?
• What is the importance of worker involvement in safety programs?
• Which elements constitute effective incident data collection and reporting?
• Differentiate between hazard identification and risk assessment.
• Under Rule 1967.03 OSHS, periodical examination is conducted to do which of the following?
• In hazard identification and risk assessment (HIRA), which step follows ‘assess risk’ (likelihood and severity)?
• When responding to a chemical spill on a concrete floor, what sequence aligns with SDS guidance?
• Which statement best describes the relationship between Job Hazard Analysis (JHA) and Safe Work Procedure (SWP)?
• Which of the following is NOT listed as an element for fire according to the material?
• Which statement about the annual exposure data report is true?
• What is the purpose of performing a risk-based training needs analysis in a safety program?
• What is the purpose of a fire watch in hot work?
• How should near misses be handled to improve safety performance?
• What is the purpose of an Emergency Action Plan (EAP) and what are its essential elements?
• Which section of DO 198-18 states workers and their representatives have the right to report accidents, dangerous occurrences, and hazards to the employer, to DOLE, and to other authorities?
• Which report is submitted to the Regional Labor Office and the Bureau of Working Conditions by the last day of March following the covered period?
• Under Rule 1960 OSHS, what is the health examination at the time of first hire or first exposure called?
• Explain control banding and its applicability to small businesses.
• Which option best describes the difference between a safety inspection and a safety audit?
• General ventilation is described as which of the following?
• Which elements are typically included in the formal Safety Management System management review process?
• The Annual Medical Report deadline is the last day of March of the year following the covered period.
• Which metric is considered a leading indicator of safety performance?
• The rate that accounts for the total number of deaths, permanent total, permanent partial, and temporary total disabilities occurring during the period is called what?
• Which component is essential in an Emergency Drills program?
• What is the role of incident reporting timelines and regulatory requirements in BOSH?
• Which term refers to measures or actions taken to eliminate or minimize risk for people exposed to hazards?
• Which practice is essential for testing and maintaining alarms and emergency notification systems?
• Which statement best describes when periodic medical surveillance should be implemented?
• Local exhaust ventilation is an example of which level in the Hierarchy of Controls?
• Why is PPE used as the last line of defense in the hazard control hierarchy?
• What is the difference between a near-miss and a minor incident, and why is reporting both important?
• Cooperation from those involved is essential for a successful accident investigation.
• Which OSHS rule covers notification and keeping records of accidents and/or occupational illness?
• The statement: The workers OSH seminar and other trainings/orientations as required by the employer and by any law shall be at cost on the worker and considered as compensable working time.
• What information must a Safety Data Sheet (SDS) contain, and why is it critical in chemical safety?
• What is the purpose of near-miss reporting, and how should it be encouraged?
• How do noise controls and hearing conservation programs reduce hearing loss risks?
• What is the mandated duration of the mandatory forty-hour basic OSH training course?
• In an Emergency Response Plan, which element specifies who coordinates the on-scene response?
• What makes a Safe Work Procedure effective?
• What is a Safe Operating Procedure (SOP) and how is it used?
• Which statement best describes the difference between a Job Safety Analysis (JSA) and a Risk Assessment?
• What is the purpose of training and competency within an SMS?
• Biological monitoring is one of the three important tools in preventing diseases due to toxic agents, the other two being environmental monitoring and health surveillance.
• What is the standard process for maintaining emergency equipment like extinguishers and first aid kits?